prolific usb to serial comm port version 3.2.0.0

You just need to know where to find these options and how to install them properly. The USB cable driver offered by Baofeng is buggy and the programming software made by the manufacturer is, for all intents and purposes, junk.įortunately, there are other options available, and once properly installed, they are actually quite good. However, programming a Baofeng radio from a computer isn't all that intuitive and can become messy even for the most experienced ham who is not used to Chinese-made radios. These attributes have made Baofeng a household name in the ham community. They are some of the most affordable amateur radios on the market. These radios are compact, easy to use, versatile and, best of all, extremely inexpensive. Models such as the UV-3R, UV-B6, BF-F9 and the legendary UV-5R are a common staple in the modern ham shack, and with good reason. If so, you can now use the cable.Baofeng handheld two way radios are well known among amateur radio operators everywhere. Now check Device Manager again under the 'Ports (COM & LPT)' and see if the 'Prolific USB-to-Serial COMM Port' is now listed there with a port number assigned to it…. Next, select 'Let me pick from a list of available drivers on my computer', then highlight the top driver (the oldest one) in that list, 'Prolific USB-to-Serial COMM Port Version: 3.2.0.0 and click 'Next'.

Right click on that PL2303HXA line, and select 'update driver', then select 'browse my computer for drivers'.

it will most likely have a yellow exclamation point and a note about the PL2303HXA chip being phased out. Next, open your 'Device Manager', and under 'Ports (COM & LPT)' look for an entry for the cable. Run that exe file to install the drivers on your computer, and then restart your computer and connect the cable to just your computer. If you can't get this procedure to work, there is no other work-around for the older USB-1 cable.ĭownload the 'PL-2303 Vista Driver Installer.exe' from the following link, make sure you download the first file on that page. Once you have the driver download stored on your computer, and are familiar with the procedure, it takes less than 30 seconds to re-install the older driver if needed after a Windows update. on some of the larger Windows updates, you may need to quickly run through the driver procedure again to re-install the older driver.

I’ve been using my older cable with older drivers on Win10 and 11 since Microsoft released them. Click to expand.If you still have your old genuine USB-1 cable, and you want to get some additional use out of it, there is a workaround.

Prolific usb to serial comm port version 3.2.0.0